Laticrete 9235 Waterproofing Membrane Full Unit 6 Gal Kit

9235 Waterproofing Membrane is a thin, load-bearing waterproofing designed specifically for the special requirements of ceramic tile, stone and brick installations. A self-curing liquid rubber polymer and a reinforcing fabric are quickly applied to form a flexible, seamless waterproofing membrane that bonds to a wide variety of substrates.

Features

• Full Unit Kit includes: 1 x 6 gal (23 l) pail liquid, 1 x 300 ft2 (28 m2) roll fabric 38" (965 mm wide), 1 x 75 ft (23 m) long roll fabric 6" (150 mm wide)
• Approximate coverage for the full kit is 300 sq ft
• LATICRETE 9235 Waterproofing Membrane is The Industry Standard for wet areas and continuous water submersion applications
• Applies with a paint roller or brush, cures in just hours and provides a permanent waterproofing base for tile, glass mosaic and stone in pools, showers and spas
• Accepted by IAPMO and ICC for shower pans, meets ANSI A118.10 and ANSI A118.12, is non-hazardous and meets all V.O.C. requirements
• When anti-fracture treatment is required in wet areas, LATICRETE 9235 Waterproofing Membrane provides the complete package
• You only need one product to protect your floor from water damage and substrate cracks
• Equipped with Microban antimicrobial technology
• Microban provides around-the-clock product protection from the growth of microbes including bacteria, mold and mildew
• Integrated antimicrobial technology stays present and active for the expected lifetime of a product at a cellular level to continually disrupt growth and reproduction of contaminating microorganisms

Advantages

• Inhibits stain causing mold and mildew growth in the substrate with Microban antimicrobial product protection
• Safe-no solvents and non-flammable
• Interior and exterior use
• Vertical and horizontal surfaces (including ceilings)
• Thin-only 0.02" (0.5 mm) thick when cured
• Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
• "Extra Heavy Service" rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
• IAPMO and ICC Approval
• Applies quickly with a paint brush or roller-no special mixing or application equipment needed
• Fast cure-normally ready in hours for finishes
• Install tile, brick and stone directly onto membrane
• Certified by The GREENGUARD Institute
• Easy cleanup-just use water while fresh
• Protects concrete & reinforcing steel from corrosion

Uses

• Swimming pools, fountains & water features
• Shower pans, stalls & tub surrounds
• Bathrooms & laundries (industrial, commercial and residential)
• Spas, hot tubs
• Kitchens & Food Processing Areas
• Terraces & balconies over unoccupied spaces
• Countertops
• Facades
• Steam rooms (when used in conjunction with a vapor barrier)

Suitable Substrates

• Concrete
• Cement Mortar Beds
• Cement Plaster
• Concrete and Brick Masonry
• Exterior Glue Plywood*
• Gypsum Wallboard*
• Ceramic Tile and Stone**
• Cement Terrazzo**
• Cement Backer Board***
• * Interior Applications Only
• ** If skim coated with a LATICRETE Latex Thin-Set Mortar
• *** Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior us